TOP >> Select top >> KDC-X9006U >> How to use 1. Create the wallpapers by using PICTURE ENGINE. 2. Save the file onto your PC. 3. Copy or cut & paste the file to the USB memory. Make sure to use the FAT16/32 file format. Simplified instructions are shown below for your convenience: 1. After the files are written into the USB memory, insert the USB memory into the USB slot of the KDC-X9006U. 2. Set to Standby Mode. 3. Set to Menu mode. 4. Select the Display Download item. 5. It enters the Image Download mode. 6. Select the image file you wish to download. 7. Display image downloading begins. 8. Display image registering is completed. * These image files are specific for KDC-X9006U and cannot be used for any other models. No Display File >> Check to see if a downloaded file is on the USB memory. When preparing the USB memory, please be careful not to delete the file extension (.kbm). Writing Error   >> Not operating properly for some reason. Press the Reset button and attempt downloading again. If the error message appears again, please consult an authorised Kenwood service dealer. Incorrect File   >> Download was attempted on an unsupported file format. Please prepare the file again. Download Error   >> Unsuccessful in reading the file during the download operation. Plaease create the file with PICTURE ENGINE again. Download is cancelled and the display returns to Menu.   >> Front panel opened during upload of the file was in process. Try downloading again. * For further instructions, please refer to the supplied instruction manual. You can also download instruction manual from below.   0.7MB 1.2MB 0.8MB   The download of PICTURE ENGINE.

Copyright 2007 Kenwood Corporation